Datasheet

ManualsBrandsKEMET ManualsCapacitorsEMI Capacitor for Harsh Environmental Conditions, 2200nF, 310VAC, 10%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3123_R52_X2_310_110C_MIN • 8/5/2020

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Built Into Tomorrow

Benets

• Approvals: ENEC, UL, cUL, CQC

• THB Grade IIB: 85°C, 85% RH, 500 hours at

URAC acc. to IEC 60384-14

• Rated voltage: 310 VAC 50/60 Hz

• Capacitance range: 0.15 – 22 µF

• Lead spacing: 15.0 – 37.5 mm

• Capacitance tolerance: ±20%, ±10%

• Climatic category 40/110/56, IEC 60068-1

• Tape & Reel in accordance with IEC 60286-2

• RoHS compliant and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+110°C

• 100% screening factory test at 1,900 VDC

• Self healing properties

• Automotive (AEC-Q200) grade

Overview

The R52 series is constructed of metallized polypropylene

lmencapsulatedwithself-extinguishingresininaboxof

material that meets the requirements of UL 94 V–0. The R52

Series is ideal for harsh environmental conditions and meets

the demanding Automotive Electronics Council's AEC–Q200

qualicationrequirements.

Applications

For worldwide use in electromagnetic interference (EMI)

suppression in across-the-line applications that require X2

safetyclassication.Intendedforuseinsituationsinwhich

capacitorfailurewouldnotresultinexposuretoelectric

shock. Typical applications include connection in series with

the mains, capacitive power supplies and energy meters,

with special emphasis in automotive applications for severe

ambientconditions.

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions

R52 (Miniature), Class X2, 310 VAC, 110°C

(Automotive Grade)

Part Number System

R52 3 I 3470 00 P0 M

Series

Rated Voltage

(VAC)

Lead Spacing

(mm)

Capacitance

Code (pF)

Packaging Internal Use

Capacitance

Tolerance

X2, Metallized

Polypropylene

3 = 310 I = 15.0

N = 22.5

R = 27.5

W = 37.5

The last three

digits represent

signicantgures.

Therstdigit

speciesnumber

ofzerostobe

added.

See Ordering

OptionsTable

K = ±10%

M = ±20%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (17 pages)

PAGE 1
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Overview Applications The R52 series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V–0. The R52 Series is ideal for harsh environmental conditions and meets the demanding Automotive Electronics Council's AEC–Q200 qualification requirements.
PAGE 2
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) 15 22.5 Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code Standard Lead and Packaging Options Bulk (Bag) – Short Leads Pizza Pack – Short Leads Ammo Pack Other Lead and Packaging Options 4 +2/-0 4 +2/-0 H0 = 18.5 ±0.5 00 BB DQ Tape & Reel (Large Reel) H0 = 18.5 ±0.
PAGE 3
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Dimensions – Millimeters FRONT VIEW SIDE VIEW L T H S LL F S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.
PAGE 4
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Rated Voltage VR Polypropylene film Metal layer deposited by evaporation under vacuum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
PAGE 5
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Performance Characteristics cont.
PAGE 6
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Impedance Graph Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 80°C) Lead Spacing 15 mm Lead Spacing 22.5 mm 100 100 0.15 0.33 0.47 0.68 0.82 10 1 0.1 Voltage (Vrms) 1,000 Voltage (Vrms) 1,000 µF µF µF µF µF 1.0 0.47 1 1.5 2.2 10 Frequency (kHz) 10.0 1 100.0 µF µF µF µF 0.1 1.0 Lead Spacing 27.5 mm 100 1 0.
PAGE 7
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 80°C) Lead Spacing 15 mm Lead Spacing 22.5 mm 1 1 0.15 0.33 0.47 0.68 0.82 0.1 0.01 0.1 1.0 Frequency (kHz) 10.0 Current (Arms) 10 Current (Arms) 10 µF µF µF µF µF 0.47 µF 1 µF 1.5 µF 2.2 µF 0.1 100.0 0.01 0.1 1.0 1 0.01 0.1 1.0 Frequency (kHz) 10.0 2.2 3.3 4.7 6.
PAGE 8
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384-14 Vibration MIL-STD-202 Method 204 Mechanical Shock MIL-STD-202 Method 213 Temperature Cycling JESD22-Method JA-104 Active Flammability IEC 60384-14 VR + 20 surge pulses at 2.
PAGE 9
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Environmental Compliance All KEMET EMI capacitors are RoHS compliant. Table 1 – Ratings & Part Number Reference Dimensions in mm Capacitance Value (µF) B H 0.15 0.22 0.33 0.33 0.47 0.47 0.47 0.68 0.68 0.82 0.47 0.56 0.56 0.68 1.0 1.0 1.5 1.5 2.2 1.0 1.5 2.2 3.3 4.7 4.7 4.7 6.8 2.2 3.3 4.7 6.8 10.0 15.0 22.0 5.0 6.0 7.5 9.0 8.5 9.0 7.5 10.0 11.0 11.
PAGE 10
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder material. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 – 221°C for the new alloys.
PAGE 11
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process.
PAGE 12
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock Vibration MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) MIL-SDT-202 Method 204 5 G for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, 0.031" thick.
PAGE 13
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Marking Lead Spacing 15 mm, 22.5 mm, and 27.5 mm FRONT TOP Approval Marks Capacitance Tolerance Series, Safety Class, Self Healing Manufacturer’s Logo Capacitance, Rated Voltage Date Code IEC Climatic Category Manufacturing Plant Flammability Category NOTE: Hot imprinting with or without color or ink jet or laser marking Lead Spacing 22.5, 27.
PAGE 14
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped Pizza 15 5 6 7.5 7.5 8.5 9 10 11 11 12 13.5 18.5 14.5 12.
PAGE 15
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 ød A B W W0 W1 H0 P1 P0 F P h h D0 P1 P2 A-B t Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.
PAGE 16
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 17
Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.