General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 50 – 1,000 VDC (Automotive Grade) Overview Applications The R60 is constructed of metallized polyester film (wound or stacked technology) with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box material meeting the UL 94V–0 requirements.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging LL Lead Length (mm) Lead and Packaging Code 4 +2/−0 H0=18.5 ±0.5 AA DQ H0=18.5 ±0.5 H0=18.5 ±0.5 2.7 +0.5/−0 3.5 +0.5/−0 10 ±1 4.0 +0.5/−0 3.2 +0.3/−0.2 18 ±1 17 +1/−2 30 +5/−0 25 +2/−1 GY CK JA JB JC JE JH JM* Z3** 40*** 50 4 +2/−0 AA H0=18.5 ±0.5 2.7 +0.5/−0 3.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 ±0.4 4.0 +0.2 9.0 +0.1 13.0 +0.2 0.6 ±0.05 10.0 ±0.4 5.0 +0.2 11.0 +0.1 13.0 +0.2 0.6 ±0.05 10.0 ±0.4 6.0 +0.2 12.0 +0.1 13.0 +0.2 0.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Polyester film (polyethylene terephthalate) Metal layer deposited by evaporation under vacum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL 94.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Performance Characteristics cont. Maximum Values at 25°C ±5°C Dissipation Factor tanδ Frequency C ≤ 1 μF C > 1 µF 1 kHz 1.00% 1.00% 10 kHz 1.50% – Measured at +25°C ±5°C, according to IEC 60384–2 Minimum Values Between Terminals Insulation Resistance * typical value Voltage Charge/Time C ≤ 0.33 μF C > 0.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) 63 VDC/40 VAC 1,000 100 100 100 VDC/63 VAC Vrms [V] Vrms [V] 1,000 10 1 0.1 0.33 µF p = 10.0 0.47 µF p = 10.0 1 µF p = 15.0 2.2 µF p = 15.0 4.7 µF p = 22.5 10 µF p = 27.5 68 µF p = 37.5 10 1 µF p = 10.0 2.2 µF p = 15.0 4.7 µF p = 15.0 6.8 µF p = 22.5 47 µF p = 27.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) 63 VDC/40 VAC 100 100 VDC/63 VAC 100 10 Irms [A] Irms [A] 10 1 1 µF p = 10.0 2.2 µF p = 15.0 4.7 µF p = 15.0 6.8 µF p = 22.5 47 µF p = 27.5 100 µF p = 37.5 0.1 0.01 0.1 1 f [kHz] 10 1 0.33 µF p = 10.0 0.47 µF p = 10.0 1 µF p = 15.0 2.2 µF p = 15.0 4.7 µF p = 22.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Environmental Test Data Damp Heat, Steady State Test Test Conditions Temperature Relative humidity (RH) Test duration Endurance Test Performances +40°C ±2°C 93% ±2% 56 days |Δ C/C| ≤ 5%, Δ tanδ ≤ 0.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Table 1A – Ratings & Part Number Reference (Stacked Capacitor Technology) cont. VDC VAC Capacitance Value (µF) 400 400 400 400 400 630 630 630 630 630 200 200 200 200 200 220 220 220 220 220 VDC VAC Dimensions in mm dV/dt (V/ µs) B H L Lead Spacing Maximum K0 KEMET Internal (V2 /µs) Part Number Customer Part Number 0.033 0.047 0.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Table 1B – Ratings & Part Number Reference (Wound Capacitor Technology) cont.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Table 1B – Ratings & Part Number Reference (Wound Capacitor Technology) cont.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Table 1B – Ratings & Part Number Reference (Wound Capacitor Technology) cont.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Table 1B – Ratings & Part Number Reference (Wound Capacitor Technology) cont.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Table 1B – Ratings & Part Number Reference (Wound Capacitor Technology) cont.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1.
Single-sided Single-sided Metallized Metallized Polypropylene Polypropylene Film Purpose Metallized Polyester Film Capacitors Film Through-Hole Capacitors – General Film Double-sided Metallized Polyester Carrier Film R60, Radial, 10.0 – 37.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Construction cont.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Marking Pitch Variants - 10, 15, and 22.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Marking cont. Pitch Variants - 10 and 15 TOP FRONT Manufacturer’s Logo Series, Dielectric Code Capacitance Rated Voltage Date Code QA Number Capacitance Tolerance Top marking in hot imprinting with or without color Pitch Variants - 10, 15, 22.5, 27.5, and 37.5 FRONT TOP This option only for 10, 15, and 22.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Packaging Quantities Lead Spacing Thickness (mm) Height (mm) Length (mm) Lead and Packaging Code Bulk Short Leads Standard Large Reel Reel ø 355 mm ø 500 mm Bulk Long Leads Ammo Taped AA - JA - JB JE - JH JC Z31 JM2 403 – 50 GY CK DQ 10 4.0 5.0 6.0 9.0 11.0 12.0 13.0 13.0 13.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 — Lead Spacing 10 mm Figure 2 — Lead Spacing 15 mm P2 P Figure 3 — Lead Spacing 22.5 & 27.5 mm ∆h W2 H0 W0 P1 F A Ød W1 B W D0 P0 P ∆h t P1 P2 A−B t Dimensions (mm) Description Symbol 10.0 Figure 1 Lead Space 15.0 22.5 Figure 2 Figure 3 27.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R60, Radial, 10.0 – 37.5 mm Lead Spacing, 63 – 1,000 VDC (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.