Datasheet

R60 Series

Metallized Polyester Film Capacitor

Rated

Capacitance

Part Number

2.2µF 20.0 40.0 41.5 1.0 37.5 25 +2/-1 R60QW42205030K

All dimensions are in mm.

GENERAL TECHNICAL DATA

Dielectric: polyester film.

Plates: metal layer deposited by evaporation under vacuum.

Winding: non-inductive type.

Leads: copper tinned wire.

Protection: plastic case, thermosetting resin filled.

Box material is solvent resistant and flame retardant according to UL94 V0.

Climatic category: 40/110/56 (IEC 60068-1)

Operating temperature range: -55 to +105°C

ELECTRICAL CHARACTERISTICS

Rated voltage (V

): 1000 Vdc / 250 Vac

Capacitance tolerance: ±10% (measured at 1kHz / 25°C ±5°C)(last digit of the Part Number)

Dissipation Factor (tgδ

δδ

δ)

))

: ≤ 1% (measured at 1kHz / 25°C ±5°C)

Insulation Resistance: ≥ 10 GOhm

Test voltage between terminals: 1600 Vdc for 2s

Maximum dv/dt: 10 V/µs

________________________________________________________________________________________________

General Disclaimer:

All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented

without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are

based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically

disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by

customers who have the requisite experience and capability to determine the correct products for their application.

The present data sheet replaces and supersedes any former one released by KEMET

KEMET's product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.