Datasheet

ManualsBrandsKEMET ManualsCapacitorsRadial Film Capacitor, 2.2uF, 40VAC, 63VDC, 10%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3102_R66 • 7/8/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Voltage range: 50 – 630 VDC

• Capacitance range: 0.001 – 4.7 µF

• Lead Spacing: 7.5 mm

• Capacitance tolerance: ±5%, ±10%, ±20%

• Climatic category: 55/105/56

• Operatingtemperaturerangeof−55°Cto+105°C

• RoHS compliance and lead (Pb)-free terminations

• Tape & Reel packaging in accordance with IEC 60286–2

• Self-healing

• Automotive grade (AEC–Q200)

Overview

TheR66isconstructedofmetallizedpolyesterlm(wound

or stacked technology) with radial leads of tinned wire.

Radial leads are electrically welded to the contact metal

layer on the ends of the capacitor winding. The capacitor is

encapsulated with thermosetting resin in a box of material

meeting the UL 94 V–0 requirements.

Automotive grade devices meet the demanding Automotive

ElectronicsCouncil'sAEC–Q200qualicationrequirements.

Applications

Typical applications include blocking, coupling, decoupling,

bypassing, and interference suppression in low voltage

applications such as automotive. Not suitable for across-

the-line application (see Suppressor Capacitors).

General Purpose Metallized Polyester Film Capacitors

R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC

(Automotive Grade)

Part Number System

R66 E D 3100 AA 7A J

Series

Rated Voltage

(VDC)

Length (mm)

Capacitance

Code (pF)

Packaging Internal Use

Capacitance

Tolerance

Metallized

Polyester

C = 50

D = 63

E = 100

I = 250

M = 400

P = 630

D = 7.5 The last three

digits represent

signicantgures.

Firstdigitspecies

the number of zeros

to be added.

See Ordering

Options Table

J = ±5%

K = ±10%

M = ±20%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (14 pages)

PAGE 1
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Overview Applications The R66 is constructed of metallized polyester film (wound or stacked technology) with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94 V–0 requirements.
PAGE 2
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging LL Lead Length (mm) Lead and Packaging Code 4 +2/−0 H0=18.5 ±0.5 AA DQ H0 = 18.5 ±0.5 2.7 +0.5/−0 3.5 +0.5/−0 10 ±1 3.2 +0.3/−0.
PAGE 3
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Polyester film (polyethylene terephthalate) Metal layer deposited by evaporation under vacuum Non-inductive type Tinned wire Plastic case, thermosetting resin filled.
PAGE 4
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Performance Characteristics cont. Maximum Values at 25°C ±5°C Dissipation Factor tanδ Frequency For all Capacitance Values 1 kHz 1.00% 10 kHz 1.50% Measured at +25°C ±5°C, according to IEC 60384–2 Minimum Values Between Terminals Insulation Resistance Voltage Charge/Time C ≤ 0.33 μF C > 0.
PAGE 5
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) 63 VDC/40 VAC 100 VDC/63 VAC 100 100 Vrms [V] 1,000 Vrms [V] 1,000 10 10 0.33 µF p = 7.5 0.68 µF p = 7.5 1.5 µF p = 7.5 3.3 µF p = 7.5 1 0.1 f [kHz] 1 10 1 0.1 100 0.1 µF p = 7.5 0.22 µF p = 7.5 0.47 µF p = 7.5 1 µF p = 7.
PAGE 6
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) 63 VDC/40 VAC 100 VDC/63 VAC 10 1 1 lrms [A] lrms [A] 10 0.1 0.1 0.33 µF p = 7.5 0.68 µF p = 7.5 1.5 µF p = 7.5 3.3 µF p = 7.5 0.01 0.1 1 f [kHz] 10 100 0.1 µF p = 7.5 0.22 µF p = 7.5 0.47 µF p = 7.5 1 µF p = 7.5 0.
PAGE 7
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Environmental Test Data Damp Heat, Steady State Test Test Conditions: Temperature: Relative humidity (RH): Test duration: Endurance Test +40°C ±2°C 93% ±2% 56 days Test Conditions Temperature: Voltage applied: Test duration: Resistance to Soldering Heat Test +105°C ±2°C 1.
PAGE 8
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.
PAGE 9
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys.
PAGE 10
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1.
PAGE 11
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Marking FRONT TOP Capacitance Capacitance Tolerance Rated Voltage Packaging Quantities Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Short Leads 7.5 3.0 4.0 5.0 6.0 8.0 9.0 10.5 12.0 10.0 10.0 10.0 10.5 1,500 2,000 1,500 1,000 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 12
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 — Lead Spacing 5 & 7.5 mm P1 P P2 Figure 2 — Lead Spacing 7.5 mm P P1 ∆h A H0 P0 F t W1 A H0 Ød W0 ∆h W2 B Ød W0 W1 W W P0 F D0 ∆h ∆h W2 B P t t A−B t A−B D0 Dimensions (mm) Description Symbol 5 Figure 1 Lead Spacing 7.5 7.5 Figure 1 Figure 2 Tolerance Lead wire diameter d 0.5 – 0.6 0.5 – 0.6 0.5 – 0.
PAGE 13
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Ammo Specifications Reel Specifications Dimensions in mm Dimensions in mm H W T D H W 360 * 340 59 355 30 55 maximum * Lower dimension available upon request (maximum 295 mm) D H H W T W © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 14
General Purpose Metallized Polyester Film Capacitors R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.