Datasheet

ManualsBrandsKEMET ManualsCapacitorsCapacitor, Radial 3.3 nF ±5% 2 kVDC

One world. One KEMET

Benets

• Voltage range: 100 – 2,000 VDC

• Capacitance range: 100 pF – 2.2 µF

• Lead Spacing: 15 – 37.5 mm

• Capacitance tolerance: ±2.5% (for 2-section construction only)

±5%, ±10%

• Climatic category: 55/105/56 IEC 60068-1

• Operatingtemperaturerangeof-55˚Cto+105˚C

• RoHS compliance and lead-free terminations

• Tape and reel packaging in accordance with IEC 60286–2

• Self-healing

• Automotive (AEC–Q200) grades available up to lead spacing

22.5mm

Overview

TheR73Seriesisconstructedofpolypropylenelmandmetalfoil

ormetallizedlmandmetalfoilwithradialleadsoftinnedwire.

The radial leads are electrically welded to the metal layer on the

ends of the capacitor winding. The capacitor is encapsulated in a

self-extinguishing solvent resistant plastic case with thermosetting

resin material meeting the UL 94V–0 requirements. Two different

winding constructions are used depending on voltage parameters.

Please see the Performance Characteristics for more information.

Automotive grade devices are available (up to lead spacing 22.5

mm) and meet the demanding Automotive Electronics Council's

AEC–Q200qualicationrequirements.

Applications

Typicalapplicationsincludedeectioncircuitsintelevisions

(ybacktuning),switchingspikessuppressioninswitchedmode

powersupply(SMPS),snubberandsilicon-controlledrectier

(SCR) commutation circuits, and switching circuits in electronic

ballasts, as well as applications with high voltage and very

high current. Not suitable for across-the-line application (see

Suppressor Capacitors).

Polypropylene Pulse/High Frequency Capacitors

R73 Series Polypropylene Film/Foil, Radial

(Automotive Grade)

Part Number System

R73 E I 2470 AA 00 H

Series Rated Voltage (VDC) Lead Spacing (mm)

Capacitance Code

(pF)

Packaging Internal Use

Capacitance

Tolerance

Polypropylene Film/

Foil

E = 100

G = 160

I = 250

M = 400

P = 630

Q = 1000

R = 1250

T = 1600

U = 2000

I = 15.0

N = 22.5

R = 27.5

W = 37.5

The last three digits

representsignicant

gures.Therstdigit

speciesthetotal

number of zeros to be

added.

See Ordering

Options Table

00, 10, 30, 40

(Standard)

H = ±2.5%

(for 2-section

construction only)

J = ±5%

K = ±10%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (20 pages)

PAGE 1
Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Overview Applications The R73 Series is constructed of polypropylene film and metal foil or metallized film and metal foil with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding.
PAGE 2
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 4 +2/-0 H0= 18.5 +/-0.5 SE DQ H0=18.5 +/- 0.5 H0=18.5 +/- 0.5 3.5 +0.5/-0 4.0 +0.5/-0 3.2 +0.3/-0.2 18 +1/-1 30 +5/-0 25 +2/-1 GY CK JB JE JH JM 40 50 4 +2/-0 SE H0=18.5 +/-0.5 3.5 +0.5/-0 4.0 +0.5/-0 3.2 +0.3/-0.
PAGE 3
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 +/- 0.4 +/- 0.4 +/- 0.4 +/- 0.4 +/- 0.4 +/- 0.4 +/- 0.4 +/- 0.4 +/- 0.4 +/- 0.
PAGE 4
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Polypropylene film Metal foil for 1 section, metal foil + metallized film for 2 sections Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
PAGE 5
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Performance Characteristics cont'd Measured at +25°C, 100 VDC 60 seconds Insulation Resistance Minimum Values Between Terminals C ≤ 0.33 μF C > 0.33 μF ≥ 100,000 MΩ ( ≥ 500,000 MΩ ) * ≥ 30,000 MΩ • µF ( ≥ 150,000 MΩ • µF ) * * typical value Qualification Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council.
PAGE 6
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40ºC) 100Vdc / 63 Vac Vrms [V] 1000 100 100 10 10 0.033 µF p=15.0 0.1 µF p=15.0 0.047µF p=15.0 0.1 µF p=15.0 1 1 0.1 1 f [kHz] 10 100 1000 250 Vdc / 125 Vac Vrms [V] 0.1 1000 100 100 0.015 µF p=15.0 10 1 1 f [kHz] 1 10 100 1000 630 Vdc / 300 Vac Vrms [V] 0.1 1000 100 100 0.033µF 0.
PAGE 7
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40ºC) Irms [A] Irms [A] 100Vdc / 63 Vac 100 100 10 10 1 1 0.047µF 0.1 µF 0.1 0.01 0.1 1 Irms [A] f [kHz] 10 p=15.0 p=15.0 100 1000 0.01 250 Vdc / 125 Vac 10 10 1 1 0.1 0.015 µF p=15.0 0.047µF p=15.0 1 Irms [A] f [kHz] 10 100 1000 0.01 1 1 0.033 µF 0.068 µF 0.22 µF 0.82 µF 0.
PAGE 8
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Environmental Test Data Damp Heat, Steady State Test Test Conditions: Temperature: Relative humidity (RH): Test duration: Endurance Test Performances +40°C ± 2°C 93% ± 2% 56 days │Δ C/C│ ≤ 2%, Δ tanδ ≤ 0.0005 @ 1 kHz IR after test ≥ 50% of initial limit Test Conditions Temperature: Voltage applied: Test duration: Resistance to Soldering Heat Test Performances +85°C ±2°C 1.
PAGE 9
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Table 1 – Ratings & Part Number Reference cont'd VDC VAC Capacitance Value (µF) 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 300 300 300 300 300 300
PAGE 10
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Table 1 – Ratings & Part Number Reference cont'd VDC VAC Capacitance Value (µF) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,
PAGE 11
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Table 1 – Ratings & Part Number Reference cont'd VDC VAC Capacitance Value (µF) 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,250 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,
PAGE 12
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Table 1 – Ratings & Part Number Reference cont'd VDC VAC Capacitance Value (µF) 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 500 500 500 500 500 500 5
PAGE 13
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys.
PAGE 14
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Soldering Process cont'd Wave Soldering Recommendations cont'd 1.
PAGE 15
Double-sided Metallized Polyester Film Polypropylene Film Dielectric Film Capacitors – Polypropylene Pulse/High Frequency Capacitors Double-sided Metallized R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Double-sided Polypropylene Polyester Carrier Metallized Film Dielectric Film Polyester Carrier Film Single-sided Metallized Polypropylene Film Construction 1 Section 1 Section Polypropylene Film 2 Sections (First Layer) Molded Plastic Case Metal Foil (Second Layer) Double-sided Metalli
PAGE 16
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Marking FRONT TOP Dielectric Code Series Manufacturing Date Code Capacitance Capacitance Tolerance Rated Voltage Packaging Quantities Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped 15 5.0 6.0 7.5 8.5 10.0 11.0 12.0 13.5 14.5 16.0 18.0 18.0 18.0 18.0 18.
PAGE 17
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Lead Spacing 7.5 mm Lead Spacing 10 & 15 mm Lead Spacing 22.5 & 27.5 Taping Specification Description Dimensions (mm) Symbol 15.0 Lead Spacing 22.5 27.5 Tolerance Lead wire diameter d 0.6 - 0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 38.1 38.1 ±1 Feed hole lead space * P0 12.7 12.7 12.7 ±0.
PAGE 18
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) H W T 360 340 59 H T Reel Specifications W Dimensions (mm) D H W 355 500 30 25 55 Maximum D H Manufacturing Date Code (IEC–60062) Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M N P R S T U V W X
PAGE 19
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.
PAGE 20
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R73 Series Polypropylene Film/Foil, Radial (Automotive Grade) Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.