Datasheet

ManualsBrandsKEMET ManualsCapacitorsCapacitor, Radial 1 uF ±10% 560 VDC/250 VAC

09/2008

182

Ød±0.05

15≤p≤27.5 p = 37.5

0.8 1.0

All dimensions are in mm.

PRODUCT CODE SYSTEM

The part number, comprising 14 digits, is formed as follows:

1 2 3 4 5 6 7 8 9 10 11 12 13 14

R 7 5

Digit 1 to 3 Series code.

Digit 4 a.c. rated voltage:

2 = 230V L = 250V

Digit 5 Pitch:

I= 15mm; N = 22.5.mm;

R= 27.5mm; W

=37.5mm

Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of

Capacitance value and the 6th digit indicates

the number of zeros that must be added to

obtain the Rated Capacitance in pF.

Digit 10 to 11 Mechanical version and/or packaging (table 1)

Digit 12 Identies the dimensions and electrical

characteristics (0 to 9).

Digit 13 Internal use.

Digit 14 Capacitance tolerance: K=10%; M=20%

Tolerance

± 5% (J) available upon request

Table 1

Standard

packaging style

Lead

length

Taping style Ordering

code

(mm)

Fig.

(No.)

Pitch

(mm)

(Digit 10

to 11)

AMMO-P

ACK 12.70 2 15.0 DQ

AMMO-P

ACK 19.05 3 22.5 DQ

REEL

Ø 355mm 12.70 2 15.0 GY

REEL

Ø 500mm 12.70 2 15.0 CK

REEL

Ø 500mm 19.05 3 22.5/27.5 CK

Loose, short leads 04

Loose, long leads

(p≥15mm)

+2/-1

Note: Ammo-pack is the preferred packaging for taped version.

R75 2 - R75 L

MKP Series

METALLIZED POLYPROPYLENE FILM

CAPACITOR

Typical applications: This special release is specically

designed for application in series with the main

(Capacitive

power supply),

with particular protection against severe

ambient conditions.

BEST FITTING COMPONENTS IN TERMS

OF BOTH SIZE & PERFORMANCES

PRODUCT CODE: R752 (Digit 12: 0 to 9)

R75L Digit 12: 0 to 9)

Pitch Box thickness Maximum dimensions (mm)

(mm) (mm) B max H max L max

15.0 <7.5 B +0.2 H +0.1 L +0.3

15.0 ≥7.5 B +0.2 H +0.1 L +0.5

22.5 All B +0.2 H +0.1 L +0.3

27.5 All B +0.2 H +0.1 L +0.3

37.5 All B +0.3 H +0.1 L +0.3

GENERAL TECHNICAL DATA

Dielectric: polypropylene lm.

Plates:

aluminium layer deposited by evaporation under

vacuum.

inding: non-inductive type.

Leads: tinned wire.

Protection:

plastic case, thermosetting resin lled.

Box material is solvent resistant and ame

retardant according to UL94 V0.

Marking: manufacturer’s logo, series (R75), dielectric

code (MKP), capacitance, tolerance, A.C. rated

voltage, manufacturing date code.

Climatic category: 55/105/56 IEC 60068-1

Operating temperature range: -55 to +105°C

Summary of content (3 pages)

PAGE 1
R75 2 - R75 L MKP Series metallized polyPROPYLENE film capacitor Typical applications: This special release is specifically designed for application in series with the main (Capacitive power supply), with particular protection against severe ambient conditions. BEST FITTING COMPONENTS IN TERMS OF BOTH SIZE & PERFORMANCES PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L Digit 12: 0 to 9) 15≤p≤27.5 0.8 Ød±0.05 p = 37.5 1.0 All dimensions are in mm.
PAGE 2
R75 2 - R75 L MKP Series metallized polyPROPYLENE film capacitor PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L (Digit 12: 0 to 9) Rated Cap. 0.033 0.100 0.082 0.10 0.15 0.18 0.22 0.27 0.33 0.47 0.27 0.33 0.47 0.56 0.68 0.82 1.0 1.5 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF 230Vac / 400Vdc* Std dimensions B H L p 4.0 9.0 13.0 10.0 6.0 12.0 13.
PAGE 3
R75 2 - R75 L MKP Series metallized polyPROPYLENE film capacitor PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L (Digit 12: 0 to 9) test method and performance electrical characteristics Rated voltage (VR): 230Vac (400Vdc) - 250Vac (560Vdc) Rated temperature (TR):+85°C Temperature derated voltage: The following decreasing factor has to be applied on the rated voltage: +85°C to +105°C: 2.00% per °C for VR (d.c.) +85°C to +105°C: 0.5% per °C for VR (a.c.) Capacitance range: 0.056 µF to 10 µF.