Datasheet

ManualsBrandsKEMET ManualsCapacitorsAEC-Q200 Metallized Polyester Film Capacitor, 10nF, 200VAC, 400VDC, 10%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Voltage range: 50 – 400 VDC

• Capacitance range: 0.001 – 4.7 µF

• Lead Spacing: 5 mm

• Capacitance tolerance: ±5%, ±10%, ±20%

• Climatic category: 55/105/56

• Operatingtemperaturerangeof−55°Cto+105°C

• RoHS compliance and lead-free terminations

• Tape & Reel packaging in accordance with IEC 60286–2

• Self-healing

• Automotive grade (AEC–Q200)

Overview

TheR82isconstructedofmetallizedpolyesterlm(wound

or stacked technology) with radial leads of tinned wire.

Radial leads are electrically welded to the contact metal

layer on the ends of the capacitor winding. The capacitor is

encapsulated with thermosetting resin in a box of material

meeting the UL 94 V–0 requirements.

Automotive grade devices meet the demanding Automotive

ElectronicsCouncil'sAEC–Q200qualicationrequirements.

Applications

Typical applications include blocking, coupling, decoupling,

timing, and oscillator circuits. Not suitable for across-the-

line application (see Suppressor Capacitors).

General Purpose Metallized Polyester Film Capacitors

R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC

(Automotive Grade)

Part Number System

R82 D C 3470 AA 60 J

Series

Rated Voltage

(VDC)

Length (mm)

Capacitance

Code (pF)

Packaging Internal Use

Capacitance

Tolerance

Metallized

Polyester

C = 50

D = 63

E = 100

I = 250

M = 400

C = 5.0 The last three

digits represent

signicantgures.

Firstdigitspecies

the number of zeros

to be added.

See Ordering

Options Table

J = ±5%

K = ±10%

M = ±20%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (16 pages)

PAGE 1
General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Overview Applications The R82 is constructed of metallized polyester film (wound or stacked technology) with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94 V–0 requirements.
PAGE 2
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging LL Lead Length (mm) Lead and Packaging Code 4 +1.5/−0 H0 = 18.5 ±0.5 AA DQ H0 = 18.5 ±0.5 2.7 +0.5/−0 3.5 +0.5/−0 10 ±1 4.0 +0.5/−0 3.2 +0.3/−0.
PAGE 3
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Polyester film (polyethylene terephthalate). Metal layer deposited by evaporation under vacum. Non-inductive type. Tinned wire. Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
PAGE 4
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Performance Characteristics cont. Maximum Values at 25°C ±5°C Dissipation Factor tanδ Frequency C ≤ 0.1 μF C > 1 µF 1 kHz 0.80% 0.80% 10 kHz 1.20% 1.20% 100 kHz 2.
PAGE 5
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) Lead Spacing 5 mm 50 VDC/30 VAC 63 VDC/40 VAC 100 Vrms [V] Vrms [V] 100 10 10 0.1 µF p = 5 0.47 µF p = 5 1 µF p = 5 2.2 µF p = 5 4.7 µF p = 5 1 0.1 1 f [kHz] 10 100 10 100 1 0.1 1 f [kHz] 10 100 100 VDC/63 VAC Vrms [V] 100 0.01 µF p = 5 0.047 µF p = 5 0.
PAGE 6
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) Lead Spacing 5 mm 50 VDC /30 VAC 63 VDC/40 VAC 10 1 1 Irms [A] Irms [A] 10 2.2 µF p = 5 4.7 µF p = 5 0.1 0.1 0.1 µF p = 5 0.47 µF p = 5 1 µF p = 5 0.01 0.1 1 f [kHz] 10 100 10 100 0.01 0.1 1 f [kHz] 10 100 100 VDC/63 VAC 10 1 Irms [A] 0.01 µF p = 5 0.047 µF p = 5 0.
PAGE 7
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Environmental Test Data Damp Heat, Steady State Test Test Conditions: Temperature: Relative humidity (RH): Test duration: Endurance Test Performances +40°C ±2°C 93% ±2% 56 days Δ C/C ≤ 5%, Δ tanδ ≤ 0.
PAGE 8
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Table 1 – Ratings & Part Number Reference cont.
PAGE 9
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys.
PAGE 10
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1.
PAGE 11
Single-sided Single-sided Metallized Film Through-Hole Capacitors –Metallized General Purpose Metallized Polyester Film Capacitors Polypropylene Polypropylene R82, Radial, 5 mm Lead Spacing, 50Film – 400 VDC (Automotive Grade) Film Double-sided Metallized Polyester Carrier Film Polyprop Film Die Construction 3 Sections Wound 3 Sections 4 Sections Single-sided Metallized Polypropylene Film (First Layer) Molded Plastic Case Single-sided Metallized Polypropylene Film (Second Layer) Metallized Impregn
PAGE 12
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Construction cont. Stacked .
PAGE 13
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Marking Wound Stacked TOP TOP . Capacitance Capacitance Tolerance Voltage Capacitance Capacitance Tolerance OR OR FRONT FRONT Capacitance Tolerance Capacitance . Capacitance Voltage Voltage Capacitance Tolerance Voltage Packaging Quantities Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Short Leads 5 2.5 3.5 4.5 5.0 6.0 7.2 6.
PAGE 14
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 — Lead Spacing 5 & 7.5 mm P1 P P2 Figure 2 — Lead Spacing 7.5 mm P P1 ∆h A H0 W2 B W0 P0 F t A H0 Ød W1 P ∆h ∆h ∆h W2 B Ød W0 W1 W W F D0 P0 t t A−B t A−B D0 Dimensions (mm) Description Symbol Lead Spacing 5 7.5 7.5 Figure 1 Figure 1 Figure 2 Tolerance Lead wire diameter d 0.
PAGE 15
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Ammo Specifications Reel Specifications Dimensions in mm Dimensions in mm H W T D H W 360 * 340 59 355 30 55 maximum * Lower dimension available upon request (maximum 295 mm) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 16
Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.