Datasheet
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9008_SBCP • 9/18/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Through-Hole Inductors – Conformally Coated SBCP Coils
Handling Precautions
Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long-term storage.
KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70%
relative humidity. Atmospheres should be free of chlorine and sulfur-bearing compounds. Temperature uctuations should
be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly,
preferably within six months of receipt.
Export Control
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export
license specied by the law is required for export.
For customers outside Japan
Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional
weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons.