Datasheet

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3083_SMC • 3/18/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Surface Mount Metallized PPS Film Capacitor
SMC, Encapsulated, Size 2220 – 6560, 50 – 400 VDC
Flux & Cleaning
KEMETrecommendsusingano-cleanuxwithahalogencontentlowerthan0.1%.TocleanthePCBassemblyKEMET
recommends to use a suitable solvent like Isopropyl alcohol, deionized water, or neutral pH detergents. Aggressive solvents
shall not be used. For any different cleaning solvent used please contact KEMET Technical Services to analyze the potential
impact on KEMET products.
Storage and Moisture Recommendations
KEMET SMD Film Capacitors are supplied in a MBB (Moisture Barrier Bag) Class 1. We can guarantee a 24 month shelf life
(temperature≤40°C/relativehumidity≤90%).AftertheMBBhasbeenopened,componentsmaystayinareaswithcontrolled
temperatureandhumidity(temperature≤30°C/relativehumidity≤60%)for696hours[MSL2a].Forlongerperiodsoftime
and/or higher temperature and/or higher relative humidity values, it is absolutely necessary to protect the components
against humidity. If the reel inside the MBB is partially used, KEMET recommends to re-use the same MBB or to avoid areas
without controlled temperature and humidity (see above). If the above conditions are not respected, components require a
baking(minimumtime:48hoursat55±5°C)beforethereow.
Packaging Quantities
Chip Size
(EIA)
Base
(mm)
Height
(mm)
Length
(mm)
Bulk
Reel
Horizontal
Orientation
Reel
Vertical
Orientation
2220
5.0
3.0
5.7
2,000
2,400
2220
5.0
4.0
5.7
2,000
2,100
2824
6.0
3.0
7.3
2,000
2,500
2824
6.0
3.5
7.3
2,000
2,300
2824
6.0
4.5
7.3
1,000
1,700
4036
9.1
5.5
10.2
1,000
800
500
5045
11.5
6.5
12.7
1,000
600
400
6560
15.0
7.0
16.5
800
500
200