Datasheet

ManualsBrandsKEMET ManualsCapacitorsRadial Film Capacitor, 470nF, 30VAC, 50VDC, 5%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3072_SMR • 3/6/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Voltage range: 50 – 400 VDC, 30 – 200 VAC

• Capacitance range: 0.001 – 22 µF

• Lead spacing: 5 – 27.5 mm

• Capacitance tolerance: ±10%, ±20%, ±2.5% and ±5%

on request

• Climatic category: 55/150/56, IEC 60068–1

• Tape & Reel packaging in accordance with IEC 60286–2

• RoHS compliant and lead-free terminations

• Categorytemperaturerange−55to+150°C

• Ratedtemperature+125°C

Overview

TheSMRSeriesisametallizedpolyphenylenesuldelm

capacitor with vacuum-evaporated aluminum electrodes.

Radial leads of tinned wire are electrically welded to the

contact metal layer on the ends of the capacitor winding.

The capacitor is encapsulated in self-extinguishing material

meeting the requirements of UL 94 V–0.

Applications

Typical applications include automotive and other

applications with high ambient temperatures, as well as

those requiring high stability and low losses. The capacitor

offers excellent sound quality in audio applications.

MetallizedPolyphenyleneSulde,Stable+150°CHighTemperatureCapacitor

SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC

Legacy Part Number System

SMR 5 104 K 50 J01 L4 BULK

Series

Lead Spacing

(mm)

Capacitance Code (pF)

Capacitance

Tolerance

Rated Voltage

(VDC)

Size Code Lead Length Packaging

Metallized PPS 5 = 5.0

7.5 = 7.5

10 = 10.0

15 = 15.0

22.5 = 22.5

27.5 = 27.5

First two digits indicate

thetwomostsignicant

digits of the capacitance

value in picofarads. The

third digit is the number of

following zeros.

H = ±2.5%

J = ±5%

K = ±10%

M = ±20%

50 = 50

63 = 63

100 = 100

250 = 250

400 = 400

See

Dimension

Table

Letter "L"

followed by

lead length in

See Ordering

Options Table

New KEMET Part Number System

F 211 J F 104 K 050 C

Capacitor Class Series

Lead Spacing

(mm)

Size Code Capacitance Code (pF)

Capacitance

Tolerance

Rated Voltage

(VDC)

Packaging

F = Film Metallized

PPS

J = 5.0

K = 7.5

A = 10.0

B = 15.0

D = 22.5

F = 27.5

See

Dimension

Table

First two digits indicate the

twomostsignicantdigits

of the capacitance value in

picofarads. The third digit

is the number of following

zeros.

R = ±2.5%

J = ±5%

K = ±10%

M = ±20%

050 = 50

063 = 63

100 = 100

250 = 250

400 = 400

See Ordering

Options Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (27 pages)

PAGE 1
Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Overview Applications The SMR Series is a metallized polyphenylene sulfide film capacitor with vacuum-evaporated aluminum electrodes. Radial leads of tinned wire are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated in self-extinguishing material meeting the requirements of UL 94 V–0.
PAGE 2
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) KEMET Lead and Packaging Code Legacy Lead and Packaging Code 4.0 +1/−0 16.5 ±0.5 H0= 18.5 ±0.5 C ALG5C L L4BULK L16.5CBULK L16.5TR18 Ammo pack H0= 18.5 ±0.5 R L16.5TA18 Tape & Reel (large reel) H0= 18.5 ±0.5 P L16.5LR18 4.0 +1/−0 16.5 ±0.5 H0= 18.5 ±0.5 C ALG5C L L4BULK L16.5CBULK L16.
PAGE 3
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Ordering Options Table cont'd Lead Spacing Nominal (mm) Lead Length (mm) KEMET Lead and Packaging Code Legacy Lead and Packaging Code 4.0 +1/−0 16.5 ±0.5 H0= 18.5 ±0.5 C ALG5C L L4BULK L16.5CBULK L16.5TR18 Tape & Reel (large reel) H0= 18.5 ±0.5 P L16.5LR18 Ammo pack H0= 18.5 ±0.5 XLAF1 L25.0CXA18 Tape & Reel (standard reel) H0= 18.5 ±0.5 XLTF1 L25.
PAGE 4
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d 0.
PAGE 5
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Performance Characteristics Rated voltage VR (VDC) 50 63 100 250 400 Rated voltage VR (VAC) 30 40 63 160 200 Capacitance range (µF) 0.001 – 22 0.001 – 22 0.001 – 12 0.001 – 3.9 0.001 – 1.8 Capacitance tolerance ±10%, ±20%, ±2.
PAGE 6
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Derating of Vrms vs. Frequency, +100°C Ambient Temperature & 20°C Internal Heating, Typical Values Lead spacing 5.0 mm 50 VDC/30 VAC 63 VDC/40 VAC 10 Vrms Vrms 10 5 0.10 mF 0.22 mF 0.47 mF 1.0 mF 1.0 f (kHz) 100 1,000 100 VDC/63 VAC 0.047 mF 0.10 mF 0.22 mF 10 f (kHz) 100 1,000 10 f (kHz) 100 1,000 250 VDC/160 VAC 100 10 1.0 0.10 mF 0.22 mF 0.
PAGE 7
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Derating of Vrms vs. Frequency, +100°C Ambient Temperature & 20°C Internal Heating, Typical Values (cont'd) Lead spacing 7.5 – 27.5 mm 50 VDC/30 VAC 63 VDC/30 VAC 10 Vrms Vrms 10 5 4.7 µF 2.2 µF 1.0 µF 0.47 µF 10 µF 22 µF 1.0 10 f (kHz) 100 5 0.22 µF 0.47 µF 1.0 µF 2.2 µF 4.7 µF 10 µF 22 µF 1.
PAGE 8
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Environmental Test Data Damp Heat Test Test Conditions T = +40°C, RH = 93%, t = 56 days Δ C/C ≤ ±3% Test Criteria Δ tanδ ≤ 0.0025 (1 kHz) IR after test 0.5 x IR minimum Endurance Test Test Conditions T = +125°C, V = 1.25 x (0.5 x VR) t = 2,000 hours Δ C/C ≤ ±3% Test Criteria Δ tanδ ≤ 0.002 (1 kHz), C > 1 µF Δ tanδ ≤ 0.003 (10 kHz), C ≤ 1 µF IR after test 0.
PAGE 9
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 10
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 11
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 12
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 13
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 14
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 15
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 16
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 17
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 18
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 19
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221°C for the new alloys.
PAGE 20
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Soldering Process cont'd Wave Soldering Recommendations cont'd 1.
PAGE 21
tallized Polypropylene Film ided zed ylene m Double-sided Metallized Polyester Film Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 22
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Marking Lead Spacing 5 mm FRONT TOP Manufacturer’s Plant, Date Code Series Rated Voltage Capacitance Value Capacitance Tolerance Lead Spacing 7.5 – 22.5 mm FRONT TOP Manufacturer’s Logo Series Manufacturer’s Plant, Date Code © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 23
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Marking Lead Spacing ≥ 27.
PAGE 24
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Packaging Quantities cont'd KEMET Legacy Bulk Bulk Lead Thickness Height Length Size Size Short Long Spacing (mm) (mm) (mm) Code Code Leads Leads Standard Reel 360 mm Large Standard Ammo Reel Ammo Reel Formed 500 mm Formed 4.0 4.5 5.0 6.0 9.5 4.0 9.0 10.5 11.0 12.0 7.5 8.0 13.0 13.0 13.0 13.0 13.0 13.
PAGE 25
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 22.5 – 27.5 mm Lead Spacing 10 – 15mm 0 0 Formed Leads from 10 and 15 mm to 7.5 mm 0 Taping Specification Standard IEC 60286-2 Dimensions in mm Lead Spacing +6/−0.1 F 5 7.5 Formed 7.5 10 15 22.5 27.5 F ±0.5 W 18 18 18 18 18 18 18 18 +1/−0.
PAGE 26
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.
PAGE 27
Film Capacitors – Metallized Polyphenylene Sulfide, Stable +150°C High Temperature Capacitor SMR, 5.0 – 27.5 mm Lead Spacing, 50 – 400 VDC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.