Datasheet

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF0036_SSHB10H • 3/4/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
AC Line Filters – Dual Mode SSHB Coils, 10H Series, High Impedance Type
Magnetic Permeability of Ferrite Material
Inordertoachieveecientnoisereduction,itisimportanttoselectthematerialaccordingtothetargetfrequencyband.
Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band. A
schematic representation of the relationship between the magnetic permeability of each material and the corresponding
effective band range is shown in Figure 1.
Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic
permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction
noise, while Ni-Zn products are commonly used for radiation noise countermeasures.
The effective frequency range varies depending on core shape, size, and number of windings. This frequency dependence
ofthemagneticpermeabilityasshowninthegureservesforreferencepurposesonly.Itshouldbetestedontheactual
device to determine its effectiveness.
S18H, S15H, 10H, 7H, 5H, 1400L, and 700L are KEMET’s proprietary ferrite material names. Other materials are available
upon request.
Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range
10 kHz
0
10,000
20,000
100 kHz 1 MHz 10 MHz 100 MHz 1 GHz
Effective Frequency Range
Magnetic Permeability
Ni-Zn Series
1400L
700L
S18H
S15H
10H
7H
5H
Mn-Zn Series
Lower magnetic permeability:
Higher noise suppression effect
in the higher frequency range
Higher magnetic permeability:
Higher noise suppression effect
in the lower frequency range