Datasheet

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 10/22/2018

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped

T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar

Capacitor Marking

Polarity

Stripe (+)

Voltage

Rating

Capacitance

(pF code)

KEMET

Trademark

Date

Code

Storage

Tantalum molded radial/axial capacitors should be stored in normal working environments. KEMET recommends that

maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60°C RH. Storage at high

temperature may cause a small, temporary increase in leakage current (measured under standard conditions), but the

original value is usually restored within a few minutes after application of rated voltage. Storage at high humidity may

increase capacitance and dissipation factor. Solderability will be degraded by exposure to high temperatures, high humidity,

corrosive atmospheres, and long term storage. For optimized solderability capacitors stock should be used promptly,

preferably within three years of receipt.

Tape & Reel Packaging Information

Table 2 – Packaging Quantity

Case Size

Standard Bulk

Quantity

Standard Reel

Quantity

Reel C-Spec

Ammo Pack

Quantity

A 1,000 1,500

C-7301/7303

2,500

B 1,000 1,500 2,500

C 1,000 1,500 2,500

D 1,000 1,000 2,000

E 1,000 1,000 2,000

F 500 1,000 1,500

G 500 1,000 1,500

H 500 800 1,500

J 100 800 800

K 100 500 800

L, M 100 500 Pending 500