Tantalum chip capacitors Standard / HighCap Ordering code: Date: B45196E1335+10* July 2006 © EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Tantalum chip capacitors B45196E1335+10* Standard / HighCap Features Ultra-high volumetric efficiency Excellent solderability Stable temperature and frequency characteristics Low leakage current, low dissipation factor Low self-inductance High resistance to shock and vibration Suitable for use without series resistor (recommended operating conditions see www.epcos.com/tantalum_gti, section 4.
Tantalum chip capacitors B45196E1335+10* Standard / HighCap Ordering code structure B45 196E 0 685 Tantalum capacitor Series 196E = Standard, tinned terminals 198E = Standard, gold-plated terminals 196H = HighCap, tinned terminals 198H = HighCap, gold-plated terminals Rated voltage 0 = 4 V, 1 = 6.3 V, 2 = 10 V, 3 = 16 V, 4 = 20 V, 5 = 25 V, 6 = 35 V, 7 = 50 V Rated capacitance + exponent C [pF] 10x E.g.
Tantalum chip capacitors B45196E1335+10* Standard / HighCap Cautions and warnings When using tantalum capacitors with a manganese dioxide coating, the following cautions and warnings should be taken into account: Polarity Because tantalum capacitors are polar capacitors, it is important to observe their polarity markings (positive pole on the anode, negative pole on the cathode).
Tantalum chip capacitors B45196E1335+10* Standard / HighCap Low-resistance applications and voltage networks For low-resistance applications, EPCOS recommends a maximum operating voltage of half the permissible maximum continuous voltage, so that the capacitors have sufficient tolerance to withstand voltage peaks.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
