Datasheet

ManualsBrandsKEMET ManualsAcceleration & Force SensorsVibration Sensor 3.2 ... 5.5V ±100 m/s²/10 Hz ... 15 kHz Number of Axes 1

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard SE0209_VS • 9/12/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Overview

KEMET’s VS vibration sensors can detect vibrations in a

wide frequency range from 10 Hz up to 15 kHz, through

the effective conversion of vibrations to electrical signal

by utilizing proprietary optimized piezo ceramic material

and original vibration amplifying design. As no amplier is

required, it makes it very easy to embed.

Its ability to detect even the faintest levels of vibration

throughout a large sensing bandwidth makes it ideal for

predictive maintenance and process control operations

in industrial IoT, allowing for correction and data analysis

ow to PLC, micro-computer or analyzers.

Applications

Typical applications include abnormal vibration detection and

condition monitoring of production facilities of all industries,

motors, bearings, and pumps.

Vibration Sensors

VS Vibration Sensors

Benets

• Proprietary piezo ceramic material

• High sensitivity

• Large sensing bandwidth

• Built-in amplier

J Type

• Unique detachable cable design for easy installation

• Compact and low-prole (Ø 18.0 × 11.0 mm)

• Waterproof and oil-resistant

• Case-insulated

• Current noise resistant

B Type

• Integrated cable

• Ultra compact and ultra low-prole (8.4 x 11.4 x 2.9 mm)

• Easy to embed

VS–JV10A VS–BV203–B

Summary of content (14 pages)

PAGE 1
Vibration Sensors VS Vibration Sensors Overview Applications KEMET’s VS vibration sensors can detect vibrations in a wide frequency range from 10 Hz up to 15 kHz, through the effective conversion of vibrations to electrical signal by utilizing proprietary optimized piezo ceramic material and original vibration amplifying design. As no amplifier is required, it makes it very easy to embed.
PAGE 2
Vibration Sensors – VS Vibration Sensors Ordering Information VS- J V 10 Series Model Type Output Type Sensitivity VS = Vibration Sensor B J V = Voltage 10 = 10 m/s2 C = Current 20 = 20 m/s2 A -K01 Interface Version Accessories Blank = M8 connector type 3 = Integrated 3m cable type A B Blank = Without accessory K01 = Cable + magnet + stud for J type sensor K02 = Cable for J type sensor K03 = Cable + magnet for J type sensor K04 = Cable + stud for J type sensor Environmental Compliance Al
PAGE 3
Vibration Sensors – VS Vibration Sensors Approvals The KEMET vibration sensors are designed according to following standards: VS–JV10A Standard CE Certification Body File Number IEC 61000–6–4:2018 (EMI) TEE T1860701 IEC 61000–6–2:2016 (EMC) TEE T1860701 EN 50581:2012 TÜV 20180920 Certification Body File Number IEC 61000–6–4:2018 (EMI) TEE T1860702 IEC 61000–6–2:2016 (EMC) TEE T1860702 IP67 (equivalent) 1 1 With the connector inserted and tightened.
PAGE 4
Vibration Sensors – VS Vibration Sensors Table 1A - Ratings & Part Number Reference - Dynamic Characteristics Part Number Sensitivity (mV/m/s²) at 160 Hz, Z axis1 VS–JV10A 10 Sensitivity Tolerance Measuring Range (m/s²) at 160 Hz Frequency Range (Hz) Resonant Frequency (kHz) 10 to 15,000 > 30 ±100 ±15% VS–BV203–B 1 20 ±50 Measurement axis is Z axis only.
PAGE 5
Vibration Sensors – VS Vibration Sensors Sensitivity VS–JV10A Sensitivity [mV/m/s2] 100 10 Sensitivity 1 1 10 100 1000 Frequency [Hz] 10000 100000 VS–BV203–B 30 Sensitivity [mV/m/s2] 25 20 15 10 5 0 Sensitivity 1 10 100 1000 Frequency [Hz] © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 6
Vibration Sensors – VS Vibration Sensors Dimensions - Millimeters VS-JV10A 18.0 Ø1 11.0 ±0.5 29.4 22.4 ±0.5 8.0 M4 ×0.7 (Female) depth 3.0 3 4 Pin Assignement Symbol Function 1 VIN Power input 2 VOUT Sensor output 3 SG Signal ground 4 N.C. N/A © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 7
Vibration Sensors – VS Vibration Sensors Dimensions - Millimeters cont. VS-BV203-B 2.9 ±0.5 3,000 ±300 11.4 ±0.5 8.4 ±0.5 Pin 1 Pin 2 Pin 3 Pin Assignement Symbol Function 1 VIN Power input 2 VOUT Sensor output 3 GND Ground © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 8
Vibration Sensors – VS Vibration Sensors Accessories Part Number Sensor VS-JV10A Cable VSC-100PURS4-M8D-01 Magnet Base VM-03 Mounting Stud VA-01 VS-JV10A-K01 VS-JV10A-K02 VS-JV10A-K03 VS-JV10A-K04 Cable & Connector VSC-100PURS4-M8D-01 - Millimeters Cable Length: 10 m M8 Connector Pin 1: Brown/VIN Pin 2: White/VOUT Pin 3: Blue/SG (Signal Ground) Pin 4: Black/N.C. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 9
Vibration Sensors – VS Vibration Sensors Accessories cont. Basic Configuration Product Name Jacket Material Outer Diameter (mm) Cable Length (m) Conductor (mm2) Connector Tightening Torque (Nm) VSC-100PURS4-M8D-01 PUR φ5.3 10 0.34 (similar to AWG22) M8 (female)) 0.4 Connection Pin Assignement 1 Wire Color Symbol Function1 1 Brown VIN Power input 2 White VOUT Sensor output 3 Blue SG Signal ground 4 Black N.C.
PAGE 10
Vibration Sensors – VS Vibration Sensors Accessories cont. Mounting Stud VA-01 - Millimeters Basic Configuration Product Name Material Dimensions (mm) Mounting (mm) Sensor Mounting Mounting (mm) Grounding Mounting Torque (Nm) Weight (g) VA-01 SUS303 φ22×6 (excluding protruding part) M4×0.7 M4×0.7/Adhesive 1.5 14 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 11
Vibration Sensors – VS Vibration Sensors Marking Part Number Lot Code Part Number without interface and version codes Lot Code Lot Code 1st and 2nd digit = Last two digits of Year 16 = 2016 17 = 2017 18 = 2018 19 = 2019 20 = 2020 3rd and 4th digit = Month of the Year 01 = January 02 = February to 11 = November 12 = December 5th and 6th digit = Serial Number 01 02 03 etc. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.
PAGE 12
Vibration Sensors – VS Vibration Sensors Packaging Part Number Packaging Type Pieces per Inner Box Pieces per Outer Box VS-JV10A Box 1 100 VS-JV10A-K01 Box 1 10 VS-JV10A-K02 Box 1 10 VS-JV10A-K03 Box 1 10 VS-JV10A-K04 Box 1 10 VS-BV203-B Box 1 100 Handling Precautions Vibration Sensor VS-JV10A • To secure the sensor body with screws, use M4 screws with a standard mounting torque (1.5 Nm). • Tighten the M8 connector with the torque specified for the cable to be used.
PAGE 13
Vibration Sensors – VS Vibration Sensors Handling Precautions cont. Vibration Sensors in General • For outdoor usage and usage in special environments that exceed the conditions given in this product specification, please test and confirm operation in the specific target environment before use. • Hold the connector body when attaching or detaching the connector. • Do not touch the mating face with wet hands. • Make sure to wipe off any moisture present on or near the connector before use.
PAGE 14
Vibration Sensors – VS Vibration Sensors KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.