Installation Manual

Designed by Kemimoto Group Web: www. kemimoto. com
Complete journey of dreams
Installation Tips
IMPORTANT
1. Please read the installation instructions carefully before you start.
2. If the vehicle is clean and free of other debris, it will be easy to install.
3. For your safety and to ensure a satisfactory installation, please complete all the installation
steps in the order shown below.
BEFORE YOU BEGIN
1. Read these instructions and check to be sure all parts and tools are accounted for.
2. Please retain these installation instructions for future reference and parts ordering information
PRODUCT INFORMATION:
INSTALLATION TIPS:
1. Oil Can x1
2. Plug x1
3. Oil Can Cover-1 x1
4. Oil Extractor x1
5. Oil Pour Spout x1
6. Handle x1
7. Oil Can Cover-2 x1
8. 2.5mm Hose x1
9. 4mm Hose x1
10. 6mm Hose x1
11. 8mm Hose x1
1. Assemble oil can [1], plug
[2], oil extractor [4], handle [6]
and cover-2 [7].
3. Install black rubber plug of hose to the
cover-2 [7], put the other end of hose into
engine, then use handle [6] to pump out
the oil. Remember to warm up the oil
before extracting.
5. After pumping out all the oil, remove cover-2
[7] and hose, then install oil pour spout [5]. Now
you can pour the oil out from the oil can [1].
2. According to actual situation, choose
different specification of hose to pump
out the oil. There are four specifications
of hoses for your choice. (2.5mm, 4mm,
6mm and 8mm)
4. You need to manually operate
the handle [6] every 10-15 seconds.
6. Seal the oil can [1] with
cover-1 [3] when it is not in
use.
1 of 1 B1201-02901WH
2
1
4
6
5
3
7
8
9
10
11
6
6
6
4
8
9
10
11
2
7
1
10-15 s
7
5
1
1
3
7
1
5
Pour out the oil