Operation Manual

A7 MIG Gun 500-g© Kemppi Oy 2017 1712

OPERATING MANUAL

1. THE A7 MIG GUN 500-G

This document provides product information for the

Kemppi A7 MIG Gun 500-g.

Kemppi MIG/MAG guns for automatic welding are

designed for demanding professional use. They are

suitable for use in all MIG units equipped with Kemppi

robotic MIG wire feeders and power sources

2. PREFACE

Congratulations on your purchase of this product. Used

correctly, Kemppi products can signicantly increase the

productivity of your welding, and provide many years of

economical service.

This operating manual contains important information on

the use, maintenance, and safety of your Kemppi product.

The technical specications of the equipment can be

found in the chapter “Technical data” and at the end of

this manual.

Please read the manual carefully before using the

equipment for the rst time. For your own safety and that

of your work environment, pay particular attention to the

safety instructions in the manual.

For more information on Kemppi products, contact

Kemppi Oy, consult an authorized Kemppi dealer, or visit

the Kemppi Web site: www.kemppi.com.

The specications presented in this manual are subject to

change without prior notice.

Disclaimer

While every eort has been made to ensure that the

information contained in this guide is accurate and

complete, no liability can be accepted for any errors

or omissions. Kemppi reserves the right to change the

specification of the product described, at any time,

without advance notice. Do not copy, record, reproduce,

or transmit the contents of this guide without prior

permission from Kemppi.