Operation Manual

8
A7 MIG Gun 500-g© Kemppi Oy 2017 1712
OPERATING MANUAL
7. DELIVERY SCOPE
The standard scope of delivery for the hose assembly includes the following
components:
• Kink protection on the torch neck side with an integrated switch cover
• Kink protection on the machine side with a central plug
• Operating instructions
For the initial assembly, the following components are required, depending on the
welding task at hand.
• Gun neck (in the preferred size and geometry)
• Cable assembly (length depends on robot type)
To be ordered separately
• Gun mount (required for attachment to the robot)
• Set-up parts and wear parts (ordered separately)
Order data and part numbers can be found in the current Kemppi spare-parts and
wear-parts list. The contact information for consulting and ordering can be found on
the Internet, at www.kemppi.com.
8. TRANSPORT
The components are carefully checked and packed; however, damage may still occur
during shipping.
Checking procedure on
receipt of goods
Check that the shipment is correct by referring to the
shipping note.
In case of damage
Check the package and components for damage (perform
a visual inspection).
In the event of problems
If the goods have been damaged during transport, contact
the last carrier immediately. Keep the packaging (for
possible checks by the carrier).
Packaging for return of
the goods
Use the original packaging and the original packaging
materials. If you have questions about the packaging and
safety during shipment, please consult your supplier.
9. STORAGE
The appropriate physical conditions for storage in a closed room are 25 °C to 55 °C.