Operation Manual

X8 MIG WELDER 2.4 Operation
4.
To change the pass selection, scroll to a pass in a list.
5.
Press the green button to select the pass and to return to the WPS View.
Note:
You can also select the WPS or pass in the Channel view. See Selecting WPS or pass in Channel
view on page 143.
Selecting WPS or pass in Channel view
Proceed as follows:
1.
Go to Channel view.
Channel displays the memory channel or WPS and the pass you are currently using.
OPERATING MANUAL | EN 143
©
KEMPPI | 2018-09-28