Operation Manual

X8 MIG WELDER 2.4 Operation
2.
Scroll through the list of WPSs and passes to move the focus to the pass you want to take into use.
The pass immediately activates.
Caution:
After changing WPS or pass, check the pass details to make sure you are using the correct filler
wire and gas.
3.
To see all the details of the selected WPS, press the Menu button twice and select WPS. To fine tune
WPS parameters in the Welding view, press the Menu button once.
OPERATING MANUAL | EN 144
©
KEMPPI | 2018-09-28