Operation Manual

X8 MIG WELDER 2.4 Operation
5.
Identify the WPS to be used.
Select the WPS in the Task view or read the barcode on the printed document. The first pass of the WPS
is selected automatically. For more information, see Selecting WPS pass in WPS view.
6.
Identify the weld.
Read the weld's barcode from a printed work order or select the information on the display. Information
about the weld appears on Control Pad's display. During welding, the recorded welding data is linked to
the weld in WeldEye.
OPERATING MANUAL | EN 154
©
KEMPPI | 2018-09-28