Operation Manual

X8 MIG WELDER 2.4 Operation
7.
Record the filler material batch number to provide traceability.
Read the barcode from the filler wire package. If there is no barcode available, select Enter barcode in
the Task view. Use the virtual keyboard to enter the barcode number by hand.
When you read or enter the barcode for the first time, Control Pad does not recognize it. Select Filler
batch to indicate that the barcode refers to the filler batch number.
8.
To select a different weld pass from the WPS, use pass selection in the Task view.
After welding
9.
When the weld is complete, select Complete weld.
OPERATING MANUAL | EN 155
©
KEMPPI | 2018-09-28