Operation Manual

X8 MIG WELDER 2.4 Operation
White: The measured value is within the WPS limits or the WPS is not identified.
Yellow: The measured value is near the WPS limits. (Warning)
Red: The measured value is outside the WPS limits. (Alert)
There is a short reaction time, usually a few seconds, before the color changes. This makes the display easier
to read and enables monitoring of the overall welding quality.
For more information, see WeldEye help on Real-time WPS monitoring.
Entering information about non-welding activity
The device uses activities to track non-welding time or events causing pauses in the production. Activities are
divided into expected pauses (for example, lunch breaks) and unexpected pauses (for example, waiting for
a material delivery). Activities are defined in the WeldEye cloud service, and you can identify bottlenecks in
your production with them.
Select an activity with Control Pad. WeldEye registers and stores the code.
Proceed as follows:
1.
In the Task view, scroll to Activity and press the green button.
2.
Select the activity from the menu.
The activity becomes visible in Control Pad's Task view. The selected activity remains active until the
device detects welding or you select another activity.
OPERATING MANUAL | EN 158
©
KEMPPI | 2018-09-28