User Guide

Care and Maintenance of Aqua Flex Camera -
1. Aqua Flex Camera should be unplugged from
power, whenever not in use. Camera remains on as
long as power is plugged in!
2. Camera and cord should be carefully dried after
each use.
3. If used in a marine environment or a marine
aquarium, it is strongly suggested that the Aqua Flex
Camera and the video cord be soaked in clean fresh
water for a few minutes and then carefully dried.
Note: Unplug camera whenever not in use, and
when washing to be sure power cord is not submerged.
Operation of camera with Ken-A-Vision USB Adapter
1. Camera plugged into power as above.
2 Yellow Video plug should be plugged into USB
adapter.
3. USB adapter, USB connection plugs into
computer.
4. Applied Vision software should be started on
computer.
5. Picture should now be captured on computer.
Single, time-lapse pictures, time-lapse movies and
digital movies can now be captured on computer.
Aqua Flex
Aqua Flex
Instruction Manual
1470
KEN-A-VISION MANUFACTURING CO., INC.
5615 Raytown Road, Kansas City, MO 64133 U.S.A
Tel. [phone] Fax. [phone]
Email: [e-mail] www.ken-a-vision.com
Part# INS-1470