User Guide

WARNING

Nickel Metal Hydride Battery

Regular charge 8 hours

Do not use non-rechargeable batteries. Only use the NiMH batteries

and power supply/charger provided by Ken-A-Vision. Replacement Power sup-

ply - catalog no. VFPS110R-2 (110v) VFPS230R-2

(230v)

Replacement Battery - catalog no. VFBATBU2

Do Not put battery pack in fire or mutilate, battery may burst or

release toxic materials that may cause burns!

WARRANTY:TEN YEAR WARRANTY AGAINST DEFECTIVE PARTS AND WORK-

MANSHIP. EXCLUDES BULB AND BATTERY.

Ken-A-Vision has quality technicians on staff to repair or service your micro-

scope. Contact us at 1.816.353.4787 for more details.

Cordless Vision

Supplemental

Instruction Manual

T-2200C Series

T-2400C

T-2600C

KEN-A-VISION MANUFACTURING CO., INC.

5615 Raytown Road, Kansas City, MO 64133 U.S.A Tel. 816-353-4787 Fax.

816-358-5072 Email: info@ken-a-vision.com www.ken-a-vision.com

kav.instcman.cordless704.pc.v2

Part# INS-SC5C

Ken-A-Vision reserves the right to make design improvements and other changes in accordance

with the latest technology. There is no obligation to make changes in products already man-

CAUTION

PAGE 1
! WARNING CAUT I ON Nickel Metal Hydride Battery Regular charge 8 hours Do not use non-rechargeable batteries. Only use the NiMH batteries and power supply/charger provided by Ken-A-Vision. Replacement Power supply - catalog no. VFPS110R-2 (110v) VFPS230R-2 (230v) Replacement Battery - catalog no. VFBATBU2 Do Not put battery pack in fire or mutilate, battery may burst or release toxic materials that may cause burns! WARRANTY: TEN YEAR WARRANTY AGAINST DEFECTIVE PARTS AND WORKMANSHIP.
PAGE 2
INSTRUCTIONS FOR CHARGING YOUR KEN-A-VISION CORDLESS STEREOSCOPE 1. Plug in the round pin adapter from the power supply to the back of your stereoscope. 2. Then connect the opposite end to a 110v (220v international) electrical outlet. 3. With 1 over-night charge you can use your stereoscope for up to 15 hours of continuous operation. 4. You do not have to fully discharge or drain the battery to recharge.