Instructions / Assembly

WARNING: TO PREVENT ELECTRICAL SHOCK TURN OFF POWER TO FIXTURE LOCATION
Step2 :
(2)Fasten cross bar (E) to junction box with screws(F).
(3)Connect the Ground Wire from fixture to crossbar (E), connect the Ground Wire
from outlet box to crossbar (E).
Connect the wire (Neutral) from fixture to wire(Neutral) from power supply with the
wire nut.
Connect the wire (Line) from fixture to wire (Line) from power supply with the wire nut.
.
AT MAIN BREAKER.
(1)Loosen set screw(I) and slide down
canopy(G)(careful not to scratch finish).
E
F
G
H
R
(4)Slide up canopy(G) to the ceiling and tighten set screw(I).
S
I
G