Product Diagram

On the right earcup,carefully plug the Type C cable into Type C charging port. and connect
the other end of the cable to either a computer USB port or to a USB-compatible car or
wall charger.
Solid red LED light will appear to indicate when the headphone is charging.
When charging is complete, the LED light will turn Blue.
Charging time is approximately 1.5 hours.
Press & hold the power button on the right side of the headphone for about 3 seconds until
the LED indicator light turns on.
Press & hold the power button again for 3 seconds until the LED light turns off.
Power on the wireless bluetooth headphone(refer to the “Turn It On”section).
To pair the headphone with a new device,the red & blue LED light blink to indicate it is
ready to be paired with you device.
On your Bluetooth-enabled smartphone,tablet or media player,navigate to the
Bluetooth settings menu,turn on the Bluetooth feature,and search for new devices After a
few seconds you will see “900376”listed.
Tap this model to select it.Solid blue LED light indicate your device has successfully paired.
With your previously paired device’s Bluetooth turned on and in range,The headphone
will automatically reconnect to the last Bluettooth device it was connected to.
NOTE:If the headphone is not used within 5 minutes,the headphones will automatically
turn off to save battery.
Connect your device to the headphone via Bluetooth(refer to the”Pair & Connect”section)
Open your favorite music app and press play.
Control the music,track & volume from your device,or control the music & volume.Press the
Power button once to play/pause music & answer calls,press it twice to redial the last
number called on your phone,and press & hold it to reject an incoming call.
All audio,including music,games,videos,and notifications will be routed through the
headphone.
Press&Hold area(refer to product Diagram) to turn up the volume
Press&Hold area(refer to product Diagram) to turn down the volume.
Press area(refer to product Diagram) to nex track.
Press area(refer to product Diagram) to previous track.
No power
Recharge your wireless bluetooth headphone using the micro
USB cable.
Make sure your Bluetooth device has A2DP profile. Check if
both devices are paired and connected over Bluetooth.
Restart the headphone to reconnect your Bluetooth device.
Navigate to your Bluetooth settings menu on your Bluetooth
device,tap “900376”,and select “Forget”.
Now follow the steps to pair your device again.Or, press &
hold the power button on the headphone (while powered on)
to disconnect the headphones from any connected devices.
Then follow the steps to reconnect your device.
Music is not playing
over Bluetooth
Bluetooth device will
not reconnect with
the headphone
Charge It
Turn It On/Off
Pair & Connect With New Device
Play
Button Function
Toroubleshooting
Product Diagram
900376 900376
2
3
4
1
Previous Track / Volume Down
Voice Assistant
Type C Charging Port
LED indicator
Play/Pause,Answer/End Calls
Double Click: Re-dial Last Dialed Phone Number
Press & Hold (1-2 Sec):Reject Incoming Call
Microphone
Press & Hold (3 Sec):Power On
Press & Hold (3 Sec):Power Off
3
Next Track / Volume Up
2
4
5
6
7
3.5mm jacker
8
1
+
-
+
-
Press area(refer to product Diagram) to Voice Assistant.
USING MANUAL USING MANUAL
5
6
7
8