Product Manual

PAGE 1
PAGE 2
QTY 1 2-Post Rackmount Keyboard Tray Assembly QTY 10 10-32 Cross Head Screws QTY 2 Extension L Brackets QTY 10 10-32 Cross Head Screws Screw Driver *Only for 4-Post Rackmount Keyboard Tray and Extension Kit* a) Pull the keyboard forward to provide more room in the back of the tray. b) Using the included 10-32 Cross Head Screws, secure the Extension L Bracket to the rear of the keyboard tray as shown. c) Repeat on the other side.
PAGE 3
a) Using rack screws (not included) mount the Keyboard Tray on to your front rack rails as shown b) For the 2-Post Keyboard Tray this completes the assembly. c) For the 4-Post Keyboard Tray and the Extension Kit please continue to Step 3. *compatible with both cage nut and tapped style rails *Only for 4-Post Rackmount Keyboard Tray and Extension Kit* a) Attach the Extension Rails to the rear rack rails using rack screws show in Figure 1.
PAGE 4