Item Brochure

PIVOT FRAME WALL MOUNT RACKS & ACCESSORIES
The Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for
installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving
installers full access to the rear of equipment. For installation, 12 rack screws are included with the rack.
To help protect the equipment within the rack, the Pivot Frame Wall Mount Rack Cover was designed as an
enclosure for the rack. In order to create a larger racking solution, network installers will often mount
multiple Pivot Frame Wall Mount Racks above and/or below each other, and in this case, the cover acts as
a separator between each unit.
Install the Pivot Frame Stationary Rackmount Brackets to add an extra U space to the top or bottom of the
rack. In some cases, routers, hubs or other non-rack mountable devices are placed on an installed shelf
within the rack configuration. When these are positioned within the rack, the devices tend to slide off when
the pivot frame is tilted down. Designed with that in mind, the Pivot Frame Stationary Rackmount Brackets
allow these devices to be mounted and secured in a fixed position.
Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.
Pivot Frame Wall Mount Racks - Open frame design allows the rack to be installed over existing equipment
without having to remove or re-terminate network cables. Its design and the laser knockouts on both sides of
the rack also provide numerous locations for routing cabling in and out of the rack.
Pivot Frame Wall Mount Rack Cover - Easily slides on to the Pivot Frame Wall Mount Rack, and the rear cut
out provides a convenient entrance point for cable routing.
Pivot Frame Stationary Rackmount Brackets - Attach the pair of brackets to the Pivot Frame Wall Mount
Rack to add an extra U space to the rack. Brackets allow non-rack mountable components to remain in
place when the frame is pivoted down.
FEATURES
(Cover and brackets sold separately)