Item Brochure

PHANTOM CLASS

OPEN FRAME SWING-OUT RACK

The Phantom Class

Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows

you to install rack mount equipment up off the floor, and it can easily support upwards of 150 lbs. The 90

degree swing-out provides installers the access they need to install and manage patch panels, routers,

hubs, switches, cabling, and other networking devices.

90 Degree Swing-Out - Pivoting rack mount frame swings out 90 degrees to easily access the rear of

installed network equipment. Integrated positive stop prevents the gate from being opened more than 90

degrees to avoid causing damage or stress to cabling and connection points. A simple latching mechanism

securely holds the swing gate in the closed position when finished.

Easy to Assemble - Knockdown design reduces shipping charges and assembles in a snap. With just a few

steps the rack is easy to assemble, and with the 16” on center mounting holes you can mount directly to

your wall studs.

Numerous Cable Lacing Points - Both the front and rear of the wall rack feature oblong cutouts for securing

cable bundles. Simply use your preferred cable ties or hook and loop straps.

Open Back Design - Backless design allows the rack to be installed over existing equipment such as network

or electrical conduit, wall mounted equipment, and more. Perfect for upgrading a network that already is in

use because you don’t have to disconnect cables and spend time re-terminating. Just feed the device

through the top, back, or sides and mount into place.

FEATURES

PAGE 1
PHANTOM CLASS® OPEN FRAME SWING-OUT RACK The Phantom Class® Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows you to install rack mount equipment up off the floor, and it can easily support upwards of 150 lbs. The 90 degree swing-out provides installers the access they need to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.
PAGE 2
12U • • • • • One set of 10-32 tapped rails 150 lb. weight capacity 20” usable mounting depth 19” EIA-310-D compliant Ships knocked down 18U SPECIFICATIONS Size 12U 18U 1915-3-800-12 1915-3-800-18 Width 21.09" 21.09” Depth 22.12" 22.12" Height 31.24" 41.