®
Tools needed: Philips Head ScrewDriver 3/8” Wrench Power Drill What’s in the box? ** You will need to supply your own mounting hardware Front Angled Brace QTY - 2 Main Frame QTY - 1 Rear Angled Brace QTY - 2 Nylock Nut QTY - 8 Lower Stop Bracket QTY - 1 Upper Stop Bracket w/Latch QTY - 1 Swing-Out Brace QTY - 2 Flat Washer QTY - 4 6-32 Screw QTY - 4 10-32 Screw QTY - 14 Black Cap QTY - 4
10-32 Nylock Nut 10-32 Cross Head Screw Install the MAIN FRAME into the wall stud as shown above. For added stability we recommend installing hardware through the slots in the back channel.
10-32 Screw 16” on center ** Mounting Hardware Not Included **
Swing gate open 10-32 Nylock Nut 10-32 Screw
-32 Screw Flat Washer
6-32 Screw Swing Gate Closed Flat Washer 3-4” Round Cap
