Owner's manual

8U and 12U SOHO

Installation Instructions

Step 1

Remove all contents from the box and make sure all

of the following parts are accounted for.

Box Contents

2 Doors (not included with No Door Version)

4 Casters

1 Caster Hardware Pack

1 Fan Power Cord

4 Hinge Sets and Hardware

(not included with No Door Version)

1 Instruction Sheet

Tools Required

Cross head screw driver

Step 2

Install the female hinge side on the left

side of the front and back of the cabinet.

The bottom hinge should point up. The

hole should be facing up on the top of the

hinge.

Step 3

Install the male

hinge with the point

down on the door

using 4 screws.

STEP 4

Install the rails using the provided bolts and nuts. It

may be tricky to get the nut behind the rail holder so

take your time. It may help to lay the cabinet on its

side for this step.

STEP 5

Install the casters with the provided hardware

STEP 6

Plug the fan cord into the fan

PAGE 1
8U and 12U SOHO Installation Instructions Step 1 Remove all contents from the box and make sure all of the following parts are accounted for. Box Contents 2 Doors (not included with No Door Version) 4 Casters 1 Caster Hardware Pack 1 Fan Power Cord 4 Hinge Sets and Hardware (not included with No Door Version) 1 Instruction Sheet Tools Required Cross head screw driver Step 2 Install the female hinge side on the left side of the front and back of the cabinet. The bottom hinge should point up.
PAGE 2
Limited Warranty General: Under certain circumstances we offer with our products the following One Year Warranty against Defects in Material and Workmanship. Please read your Warranty carefully. This Warranty sets forth our responsibilities in the unlikely event of defect and tells you how to obtain performance under this Warranty.