® ® PLEASE READ INSTRUCTIONS BEFORE MOUNTING IT IS CRITICAL THAT THE CABINET BE INSTALLED CORRECTLY TO MAINTAIN SAFETY AND WEIGHT CAPACITY
What’s in the box? Tools/Hardware needed: Qty 1: LINIER SwingOut Wall Mount Cabinet Screwdriver and/or Drill You may also need: Mounting screws and anchors 16” on center Back View The keyhole opposite of the hinging side of the cabinet goes into the wall stud.
Swing the cabinet open carefully **IMPORTANT ** Screws going through the hinge are critical! They should be going into the studs to maintain weight capacity. This column of screws should be going into the stud. **Plastic bushing can be removed from the bottom pan of keyed side. This is inserted to help support the door during shipping, but is not needed once the cabinet is installed.
