Manual

CAUTION " While it is possible for one person to assemble this grill, obtain assistance from another person

when handling some of the larger, heavier pieces.

H nstall Side Shelves

[] Raise lid and remove all packing materials.

[] Remove Phillips Head Screws M5x8mm from the Tool

Holder. Slide the 4 Tool Hooks onto the Tool Holder with

the hooks facing the Left Side Shelf. Attach Tool Holder to

Side Shelf using these screws.

[] Align the 5 holes on the Left Bowl Panel with the 5 holes on

the Left Side Shelf. From the inside of the Grill Bowl, insert 3

Phillips Head Screws 1/4"x3/4" into the top 3 threaded holes

on the Side Shelf and tighten securely.

[] Align the 2 holes on under side of Left Side Shelf with the

threaded holes on Left Bowl Panel. Tighten securely using

2 Phillips Head Screws 1/4"x3/4".

[] Repeat the same procedure above for mounting the Right

Side Shelf.

Phillips Head Screw M5x8mm

Qty. 2

Part # Sl!2M0508B

(Stainless Steel)

Phillips Head Screw

1/4 "x3/4"

Qty. 10

Part # S112G0412B

(Stainless Steel)

Install Lid Wind Shield

[] Align the 2 holes on Rear Lid Wind Shield with the upper threaded

holes on Rear Lid Wind Shield Bracket. Insert the 2 Phillips Head

Screws 3/16"x5/16" and tighten securely.

Phillips Head Screw

3/16"x5/16"

Qty. 2

Part # S275G0305A