Manual

18
**The maximum additional water used for any combination of options is 7.1 gal. (27.0 L).
Dishwasher Control Section
High Temp Wash
Raises main wash temperature to improve
cleaning for loads containing tough,
baked-on food.
SmartWash
®
Pots & Pans
Normal Wash
Raises the main wash
temperature from 120°F
(49°C) to 140°F (60°C).
0:00 to 0:30
0 to 2.3
(0 to 8.8)
Sani Rinse
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard
184 for Residential Dishwashers. Certified
residential dishwashers are not intended for
licensed food establishments. Only sanitizing
cycles have been designed to meet the
requirements of the NSF/ANSI 184
performance standard for soil removal and
for sanitization efficacy. There is no intention,
either directly or indirectly, that all cycles on
a NSF/ANSI 184 certified dishwasher meet
the NSF/ANSI 184 performance standard for
soil removal and for sanitization efficacy.
The Sani Rinse indicator indicates at the end
of the cycle whether the Sani Rinse option
was successfully completed. If the indicator
does not activate, it is probably due to the
cycle being interrupted.
SmartWash
®
Pots & Pans
Normal Wash
Top Rack Only
Bottom Rack Only
Increases the main wash
temperature from 120°F
(49°C) to 140°F (60°C) and
the final rinse from 140°F
(60°C) to 155°F (68°C).
0:10 to 2:20
1.2 to 6.2
(4.8 to 23.3)
SmartDry™
Turns the heat element on at the end of the
wash cycle. Use rinse aid with or without
the SmartDry™ option for best drying results.
Plastic items are less likely to deform when
loaded in the top dish rack.
Available with
any cycle except
Quick Rinse
Turns the heat element on at
the end of the wash cycle.
0:11 to 0:49 0
Top Rack Only
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously clean.
Available with
any cycle
Cannot be used with
TurboZone
®
option
Slightly faster wash for
smaller loads
Saves up to
0:18
0
Bottom Rack Only
For added convenience, use for washing a
small load of dishes in the bottom rack to
help keep the kitchen continuously clean.
Available with
any cycle
Cannot be used with
TurboZone
®
option
Slightly faster wash for
smaller loads
Saves up to
0:31
0
Options
Can be selected
with
What it does
Added time
to cycle
Added
Water**
Gallons
(Liters)
H
E
H
E
Delay Hours
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak
hours when possible.
To delay the start:
1. Select a wash cycle and options.
2. Press DELAY HOURS to choose the number of hours to be delayed.
3. Press START/RESUME.
NOTE: Anytime the door is opened for more than 5 seconds (such as, to add a dish), the Start/Resume button must be pressed
again to resume the delay countdown.