Installation Guide

SOFFIT

18" MIN - 30" MAX

ABOVE

COOKING SURFACE

CABINET

3¼" X 10" DUCT

(FOR HORIZONTAL DISCHARGE)

WALL CAP

ROOF CAP

3¼" X 10" OR

7" ROUND DUCT

(FOR VERTICAL

DISCHARGE

)

HOUSE WIRING

(TOP OR BACK OF HOOD)

HOOD

1. Determine whether hood will discharge vertically

(3¼” x 10” or 7” Round) or horizontally (3¼” x 10”

only).

2. Run ductwork between the hood location and a roof

cap or wall cap.

3. Choose a straight, short duct run to allow the hood to

perform most eﬃ ciently. Long duct runs, elbows and

transitions will reduce the performance of the hood.

Use as few of them as possible. When possible, use

at least 2 foot straight runs before any turns. Larger

ductwork may be required for best performance with

longer duct runs.

4. Install wall cap or roof cap (sold separately). Connect

metal ductwork to cap and work back towards the

hood location. Use 2” metal foil duct tape to seal the

joints between ductwork sections.

INSTALL DUCTWORK (DUCTED INSTALLATION ONLY)

NOTE: Distances over 30” are at the installer and user

discretion.

1. If present, remove all protective polyﬁ lm from the

hood and/or parts. Remove 7” Round Duct Plate

from top/back of hood (see illustration at right).

Keep the screws for further use.

PREPARE THE HOOD

2. Using the ﬁ nger cup, remove the Hybrid Filters from

the hood by pushing down and tilting ﬁ lters out.

7” ROUND

DUCT PLATE

SCREWS