Installation Guide

22-59960
22-59966
22-5996X.PDF
Because of our continuous program of product improvement, Sears
reserves the right to change materials and specifications without
notice. Consult installation instructions packed with the product for
final dimensional data. For complete warranty information, contact
your local Sears Contract Sales Account Manager.
Effective 08/07/06
16406
Size Selection (Colors Below) Downdraft††
30" 22-59960
36" 22-59966
Venting Vented
CFM 500
Rectangular (Inches) 3
1
/
4
x 10
General Features
Fan Type Centrifugal
Control Type Rotary
Speeds Variable
Auto Heat Sentry
™
•
Amps 22-59960 4.0
22-59966 6.0
Volts 110-120
Cord Included •
Shipping Weight (Approx. Lbs.) 30" – 77
36" – 84
Accessories
Aluminum Grease Filter 2 Included
Replacement Grease Filters† 30" 22-233-97015841
(Pack of 2)† 36" 22-233-97015842
Range Hood Power Cord† Included
Wall Cap – 3 1/4" x 10", Black† 22-233-59391
Wall Cap – 6" Round, Aluminum† 22-233-59691
Roof Cap – 3 1/4" x 10" or
up to 8: Round, Black† 22-233-59091
Duct Transition – 3 1/4" x 10"
to 6" Round 22-233-59581
Remotely Mounted Up/Down 22-233-
Touch Pad Control, Black† RMDDRBK
Warranty
1-Year Limited Warranty –
Entire Appliance Parts & Labor
If used for other than private family purposes, warranty applies for only
90 days.
†Call Sears Parts at 1-866-732-7728
††Designed for use with cooktops only. Stainless Steel cover included.
Built-In Telescopic Downdraft Hoods
page 1 of 1
22-59960 – 30" Downdraft w/Stainless Steel Cover
22-59966 – 36" Downdraft w/Stainless Steel Cover
• Downdraft venting for your built-in cooktop
• Extra powerful 500 CFM centrifugal blower, variable speed
rotary control with memory
• Auto Heat Sentry
™
• Automatically rises to 9
1
/
2
" high with touch of a button
and disappears flush with cooktop surface when not in use
36" hood shown with optional cover
Type CFM 30" 36" Stainless
Downdraft Hood w/Stainless Steel Cover 500 • 22-59960
500 • 22-59966
7"
7"
VENT
2"
29
1
/2"
7
/32"
VENT
VENT
26
1
/4" or
32
1
/4"
30" or
36"
Counter
Top
Chimney
Top
Cook
Top
Gear
Motor
Cover
Blower
Box
Air Vent
120 Vac
Grounded
Outlet
3
1
/4" x 10"
Duct Connector
Cabinet
Front
NOTE: Duct run
not to exceed 100
equivalent feet
3-Way Venting
1
3
/
4"
Downdraft
Front to back
inside cabinet depth
Cooktop
2"
Countertop
Pay special attention to the 4 areas of potential interference
circled. 2" of FLAT countertop is needed behind rear edge of
cooktop to accommodate downdraft vent cover.
CUTOUT DIMENSIONS ARE CRITICAL! Refer to installation
instructions packed with product BEFORE making cutouts.
Make cooktop cutout far enough forward so downdraft hood will fit
behind it. Place cooktop in cutout, then use template included to
mark the downdraft hood cutout.
HOOD TECHNICAL SUPPORT
1-800-637-1453
7:30 AM – 6:00 PM Central Time