Installation guide

STEP 7

Attaching the mounting brackets

FOR WOODEN UNDERCOUNTER NOTE: Before installing the mounting brackets, please

decide which method of securing the dishwasher is

appropriate, i.e side mount or top mount. Top mount is used

for countertops made of wood or other materials that can

be drilled easily. Side mount is used for countertops made

of marble, granite, stone or other materials that cannot be

drilled easily.

if your countertop is stone, detach mounting brackets (A)

from the top and position them at either points on the side.

insert screw (B) through pre-positioned brackets on each

side of the unit and attach the brackets.

STEP 8

Connecting drain hose to the dishwasher

To attach the drain hose, orient it towards the direction of

the sink. IMPORTANT: Route hose towards sink PRIOR to

connection. DO NOT rotate the hose after attaching it to the

dishwasher. This would cause it to crimp. Attach the drain

hose elbow to the back of the unit with the included spring

clamp(B).

NOTE: DO NOT use any other clamp! Jt could cause the hose

to collapse.

Be sure you have enough drain hose to make a loop after

you slide the dishwasher in the cabinet (as shown in STEP

15).