Installation guide

STEP9

Moving dishwasher into the cabinet

iMPORTANT: Do not atlow teg teveters to scratch or mark

floor. Ptace hands where pictured to push into pMace. As you

slide the unit it, guide the water line and drain hose toward

the sink, and electric line beneath the unit. Ensure that the

excess drain hose is pushed through to the cabinet

housing the sink. Units are typicatty positioned so that the

door is flush with cabinet door and drawer fronts. For

optimal noise reduction, ensure side strips are in contact

with cabinet.

STEP10

Attaching the strain relief

Attach the strain relief (not inctuded) to the strain relief

plate. The two screws on the back of the strain relief shouMd

be positioned as shown to prevent interferences during

assembly. Tighten the strain relief lock nut to prevent the

strain retief from turning.