Installation guide

Attach drain hose (part D) to plumbing with screw clamp

(part C) and tighten. Do nat make any connections to the air

vent hose.

Do nat cut drain hose. Coil excess drain hase safely inside

cabinet behind unit.

NOTE: When connecting drain hose to disposal, make sure

that disposal knack out plug is remaved.

STEP 16

Attaching water llne and checking for leaks

Attach water line to incoming hat water shut off valve.

• Turn an water and check far leaks.

• Turn power back on at fuse box.

• Start washer, listen far water and pump far water distribu-

tion. Press Cancel/Reset to drain and check far leaks.

Check far leaks at the drain hose cannectian, the water con-

nection under the sink as well as the water line connection

under the dishwasher.