Installation guide

Note: Plumbing installations will vary - refer to local codes.
Drain hose included is 92" (234 cm) and can be extended to
a maximum of 150" (381 cm). Ensure a portion of the drain
hose is raised at least 20" (51 cm) above the floor.
Ensure that the dishwasher electrical installation is in compliance
with all national and local electrical codes and ordinances.
The dishwasher is designed for an electrical supply of 120V,
60 Hz, AC, connected to a dishwasher-dedicated, properly
grounded electrical circuit with a fuse or breaker rated for
Note: Plumbing installations will vary - refer to local codes. 15 amps. Electrica! supply conductors shall be a minimum #14
Always include a Loop in the Drain Hose for proper function AWG copper only wire rated at 75°C (167°F) or higher.
• Height of loop -[Min. 20"(51cm) - Max. 43"(109cm)]
• Length of Drain Hose included on Dishwasher 92" (233
cm)
When adding an extension to the Drain Hose the maximum
length for proper Dishwasher function is 168" (426 cm).
• A hot water supply line - Minimum 3/8" O.D. Copper
tubing, PEX, or metal braided dishwasher supply line.
• 120°F (49°C) water at dishwasher.
• Shut-off valve and fittings appropriate for hot wa-
ter supply line (copper tubing/compression fitting or
braided hose).
• 90 ° elbow with 3/8" N.P.T. male threads on one leg,
and sized to fit your water supply line (copper tubing/
compression fitting, or braided hose) on the other leg.