Installation guide

STEP |
Enclosure Preparation
NOTE: If the cabinet opening is less than 24", the side strips
may need to be removed.
_235/8" - 241/4" (600 -61 6 mm) with side strips removed.
STEP 2
Electrlcal Preparation
NOTE: This dishwasher is designed to be enclosed on the top
and both sides by standard residential kitchen cabinetry.
Select a location as close to the sink as possible far easy
access to water supply and drain lines.
Far proper dishwasher operation and appearance, ensure
that the enclosure is square and has the dimensions shown
here.
Turn power off at fuse box. Regardless of where the
electrical supply cable originates, position it 21 " (54 cm)
from the opening's left side. Extend the cable 30" (77 cm)
from the back wall. Ensure the electric line does not come in
contact with any wiring or other parts beneath the unit.