Installation guide

STEP10

Attaching the strain relief

Attach the strain relief (not included) ta the strain relief

plate. The two screws on the back of the strain relief shauMd

be positioned as shown to prevent interferences during

assembly. Tighten the strain relief lock nut to prevent the

strain relief from turning.

STEP11

Electrlcal Connection

Pass wires through strain relief and pMate. Leave 3 to 4

inches of insulated wire extending through the strain relief

plate. Tighten clamp around wires, oriented as shown.

Bending the electrical cable as shown will ease installation

of the strain relief plate.