Installation guide

STEP 13

Adjusting the leg levelers

NOTE: if the dishwasher is not level, it may not operate

properly and could cause leaks.

Check that the leveling legs are firmly against the floor.

* Place a level against the front panel.

Check that the dishwasher is plumb. If needed, adiusfleg

levelers until dishwasher is plumb.

Open the door.

Place the level inside against the top of the tub.

Check that dishwasher is level from side to side. Adiust

the leg levelers as necessary

To adiust the leg levelers:

1. Level the dishwasher horizontally by turning feet

clockwise to raise or counter-clockwise to lower front of

unit.

2. Level vertically by turning center screw to raise or lower

the back.

3. Once level, insert leg leveler locking screws (part G)

and tighten.

Prior to attachment, for top mount ensure that brackets are

positioned as far apart as possible by sliding them within

slats in direction of arrows.

For both top mount and side mount installation, insert screws

(part A) through pre-positioned mounting brackets and

attach unit to enclosure (pre-drilling of hales recommended).