Installation guide

STEP 16

Attaching water llne and checking for leaks

Attach water line to incoming hot water shut off valve.

• Turn an water and check far leaks.

• Turn power back on at fuse box.

• Start washer, listen far water and pump far water

distribution. Press Cancel/Reset to drain and check far

leaks.

Check far leaks at the drain hose connection, the water

connection under the sink as well as the water line

connection under the dishwasher.

STEP 17

Installing the toe panel

Attach the metal toe panel with screws (Part E) so it is

flush with the floor. Your installation is naw camplete.