Installation guide

STEP |
Enclosure Preparation
NOTE: This dishwasher is designed to be encMosed on the tap
and both sides by standard residential kitchen cabinetry.
Select a location as close to the sink as possible for easy
access to water supply and drain lines.
For proper dishwasher operation and appearance, ensure
that the enctasure is square and has the dimensions shown
here.
+235/8" - 241/4 .+(600 -61 6 mm) with side strips removed.
STEP:2
Elecfrlcal Preparation
Turn power off at fuse box. Regardtess of where the
etectricat suppty cable originates, position it 21 " (54 cm)
from the opening's teft side. Extend the cabte 30 .+(77 cm)
from the back watt.