Installation guide

Electrlcal Supply
Dishwasher Electrlcal Rating
Volts Hertz Amperes Watts
120 60 12 1,450
(max)
Ensure that the dishwasher electrical installation is in
compliance with all national and local electrical codes and
ordinances. The dishwasher is designed for an electrical
supply of 120V, 60 Hz, AC, connected to a dishwasher-
dedicated, properly grounded electrical circuit with a fuse
or breaker rated for 15 amps. Electrical supply conductors
shall be a minimum #14 AWG copper-only wire rated at
75°C (167°F) or higher.
Strip outer casing of electrical wire to expose 2.5" - 3"
(65 - 76 mm) of the inner wires. Then strip 1/2" (13 mm)
casing from each individual wire.
STEP3
Removing the toe panel
Gently rest the unit on its back. Remove the toe panel. Set
the toe panel aside. It will be installed later.