Installation guide

Built-up Floors—Add
shims as needed
Built-up floors: If the kitchen floor is higher than the cabinet
opening's floor - for example, the kitchen floor tile does not
extend into the cabinet opening - add shims as needed in the
area shown to bring the dishwasher up to 34" (86.4 cm) below
the countertop.
NOTE: Shims must be securely attached to floor to avoid
movement when the dishwasher is in use.
Custom Panel Installation
For custom panel installation, refer to the Custom Panel
Installation Insert Sheet (Part Number W10438319A). Complete
custom panel installation before proceeding to the “Choose
Attachment Option” section.
SAR
&
¢
F —
Ln BEG, B® f Goh, st den re g
Choose Attachme
AWARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
| | Stand dishwasher upright
ay
fee
ee me
Using 2 or more people, stand the dishwasher up.
IMPORTANT: The dishwasher must be secured to the cabinet.
There are two brackets found in the parts bag. Attach the
brackets using Option A if the countertop is wood, laminate or
another similar surface. If your countertop is marble, granite or
another hard surface, install using Option B.
Option A, Countertop Attachment
Insert bracket
Tabs.must point
to the right
Remove the brackets from the package and insert into the open
slots on the left and right-hand top of the dishwasher collar as
shown.
Using a pair of pliers, bend the tab down to secure the bracket
in place. Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
15