Installation guide

2 | Power Supply Cord-Prepare hole
cabinet
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet included with power
supply cord kit.
Option B, Direct Wire:
Helpful Tip: Wiring the dishwasher will be easier if you route the
cable into the cabinet opening from the right-hand side.
1 [Direct Wire — Drill hole
Drill a 1%" (3.8 cm) hole in right-hand cabinet side or rear.
See “Product and Cabinet Opening Dimensions” section.
2 | Direct Wire—Prepare hole
SS
oN
Ss,
1
e
Wood
a
Metal
cabinet
cabinet
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797
- not provided).
Route cable from power supply through cabinet hole (cable
must extend to the right front side of cabinet opening). Tape
cable to the floor in area shown. This will prohibit cable from
moving when dishwasher is moved into cabinet opening.
Cu amene rem Dew te. Ul rvbesr U4
Prepare and Route Water Line
Helpful Tip: Routing the water line through the left side of
cabinet opening will make water connection easier.
|
Preferred locations
&
Drill a 2" (1.3 cm) hole in the cabinet side or rear.
Measure water supply line
(copper tubing only)
Measure overall length of copper tubing for the water supply
line.