Installation guide

Option 2: No Waste Disposer and Drain Air Gap
A. Drain air gap
B. Drain hose connector
C. Waste
Option 3: Waste Disposer and Drain Air Gap
A. Drain air gap
B. Drain hose connector
C. Waste
Option 4: No Waste Disposer, No Drain Air Gap
DDN
A. Drain hose connector
B. Waste
NOTES:
™ Attach the drain hose connector to the water waste line using the
supplied hose clamp.
This connection must be before the drain trap and at least 20"
(50.8 cm) above the floor where the dishwasher will be installed. It
is recommended that the drain hose be looped up and securely
fastened to the underside of the counter.
6. Turn on water and check for leaks.
12
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
]. Remove screw securing the electrical box cover. Remove cover.
2. Route electrical wires through strain relief and secure to electrical
plate.