Installation guide

Check operation
1. Read the Use and Care Guide that came with your
dishwasher,
2. Check that aH parts have been installed and no steps
were skipped.
3. Check that you have aH the tooHs you used.
4. Start dishwasher and allow it to compHete the shortest
wash cycle. After the first two minutes, unHatch door,
wait five seconds, then open door.
5. Check to see that there is w,ater in the bottom of the
dishwasher tub. Check that dishwasher is working
properly.
6. If not, disconnect power or unplug dishwasher and see
"If dishwasher does not operate" section.
ff dishwasher does not operate
First try the solutions suggested here to possibly avoid the
cost of a service call.
+ Has the circuit breaker tripped or the house fuse blown?
+ Is the door closed tightly and latched?
+ Has the cycle been set correctly to start the dishwasher?
+ Is the water turned on?
If none of these work, call 1-800+4M_'CHOME.
8573155 +>
Printed in U.S.A.
,:c:2005 Sears, Roebuck and Co., 3333 Beverly Rd. Hoffman Estates, IL 60179 10/2005